Coming soon, 16″ 300 Blackout uppers

Here is a Mers’ 16″ 300BLK rifle with a 762SDN6, shooting Remington 220gr OTM SubSonic ammunition. Note how loud the round clanging the Steel is, opposed to when he hits the dirt berm.

By the way, when Mike interrupts Nick, Nick was commenting that the trigger resetting actually sounds louder than the shot going off to him.

We get asked fairly often about using a 7.62mm Silencer like the 762SD or the 762SDN6 on 5.56mm hosts. Here is a video of a 762SDN6 being used on a Noveske 10″ barreled SBR. The muzzle devise is an AAC 51T 5.56mm Muzzle Brake.

It would be quieter with an M4-2000, but the 762SD and 762SDN6 allow you more versatility

Want to volunteer at the shoot? Get free entry on the other day, a swag bag and food during your shift! Download the Volunteer Application here (PDF), fill it out and forward it to knox@advanced-armament.com!

Mers was out this past weekend and took along a Ruger Gunsite Scout Rifle with a Cyclone and a CycloneK. Not only will the Cyclone usually cut your groups in half, but note the Flash, Recoil and Muzzle Flip with no can versus the shots made with the same ammunition with the Cyclone.

This is on a 16″ barrel, 7.62x51mm rifle shooting Lake City M118 Special Ball.

Some easter cheer from our friend Dave:

But if you have to fix one, it’s best to have all your tools with you. “Wrench, check. Hammer, check. SBR with M4-2000, check and check!”

Thanks go out to Tommy Flanagan for the photo

Are you looking to join the AAC crew and know your way around a welding shop?  Send an overview and resume to jerrie@advanced-armament.com ASAP!

The first batch of TiRant9S Silencers is about to ship out to Dealers

The “9S” is the little brother to the Full Size TiRant9. Not as quiet, but smaller (only 5″, which is shorter than a Pilot2 .22lr can), lighter (7.6oz) and handier, we have been hearing a lot of “Home Protection” talk from customers calling and asking about the TiRant9S.

All of the TiRant9S Silencers are “Take Apart”

. . . you got an “SPR/M4″ Muzzle Brake”

Here we have the “SPR/M4 ‘Hollister’ (Single Port) Muzzle Brake”, an item much asked for and now it’s here.

Quantities are limited, act now, Operators standing by!

Contact:

Major Malfunction

Allen Arms

Armament Services

Should go without saying, but this Muzzle Brake is for the “SPR/M4” silencer in 5.56mm and they are threaded 1/2″x28tpi. The SPR/M4 muzzle devices require 2.5″ of unobstructed barrel for installation.